Drapeau Drapeau
UNI102 - Picture 1


UNI setworks for edger (1 axis) - horizontal resaw
Ask for more
More details
Technical data
    1. 2-axis setworks (UNI universal module)
    2. Axis N° 1: edger or fence
    3. Axis N° 2: horizontal resaw
    4. 56 keys keypad with finger-guide
    5. Metric scale (1/10th mm) or imperial scale (1/1000th inch), set by parameter at commissioning
    6. 10 memory pages of 32 presets keys (single or double)
    7. Going up / Going down in the presets by pulse switches
    8. Request of sizes on the keypad
    9. Manual control keys
    10. 3 inputs of offset distances for Axis N° 1
    11. Fixed width = automatic setting at the nearest preset after alignment on the width of the board
    12. Stoppage at the nearest metric or imperial unit = after manual shifting, automatic stoppage at the following centimeter
    13. Oversize or shrinkage set by parameter
    14. 20 digital inputs (specific inputs)
    15. 6 digital inputs for external presets
    16. 2 travel limits inputs forward motion and reverse motion
    17. 2 digital polarity inputs for 0-10VDC analog outputs
    18. 4 analog inputs + 12VDC
    19. 8 digital outputs (to control single-speed and double-speed motor)
    20. 2 analog outputs + 10 VDC or 0-10VDC (with or without closed loop servo control)
    21. Inputs for incremental or SSI encoder
    22. 2 MUDBUS networks and/or 2 MUDBUS CAN networks
    23. Power supply: 115VAC (recommended) or 230VAC
    24. The UNI universal setworks can be upgraded with PC touchscreen interface