HomeAll productsUNIUNI100

UNI100

UNI setworks for edger (single-axis) - line bar or moving fence (single-axis) - horizontal saw

Ask for more

More details

Technical data

Single-axis setworks (UNI universal module)
56 Keys keypad with finger-guide, of which 32 presets keys
Metric scale (1/10th mm) or imperial scale (1/1000th inch), set by parameter at commissioning
10 memory pages of 32 presets keys
Going up/going down in the presets by pulse switches
Request of sizes on the keypad
Manual control keys
Fixed width = Automatic setting at the nearest preset after alignment on the width of the board
Stoppage at the nearest metric or imperial unit = after manual shifting, automatic stoppage at the following centimeter
Lumber drying shrinkage oversize = the setworks automatically oversize the dimensions entered on the keyboard by a percentage set by parameter
15 digital inputs (specific inputs)
6 digital inputs for external presets
2 travel limits inputs forward motion and reverse motion
1 digital polarity input for 0-10VDC analog output
1 analog input + 12VDC
8 digital outputs (to control single-speed and double-speed motor)
1 analog output + 10VDC or 0-10VDC (with or without closed loop servo control)
Inputs for incremental or SSI encoder
2 MUDBUS networks and/or 2 MUDBUS CAN networks
Power supply: 115VAC (recommended) or 230VAC
The UNI universal setworks can be upgraded with a PC touchscreen interface